Installing a new AC system without checking line set length, refrigerant type compatibility, and cooling load is how homeowners end up with a unit that never performs like the spec sheet promised. Every Ac Installation quote includes a proper cooling load assessment before equipment is even selected.

A surprising number of new AC installs never reach their rated SEER2 efficiency, mostly from oversizing, an undersized line set, or ductwork that can't keep up. Sizing follows the real cooling load, and line sets get run to manufacturer spec, not just the most convenient path.
What we don't cut corners on.
Tonnage recommendations come from an actual cooling load calculation, not a rule-of-thumb estimate.
A range of SEER2-rated options lets you balance install cost against monthly energy savings.
Labor is warrantied separately from the manufacturer's parts warranty, so you're covered on both fronts, protecting the installation itself.
Line sets are sized and run according to manufacturer specification, not the shortest physical distance between units, since an undersized or overly long run quietly kills efficiency.
From load calculation to startup commissioning.
The assessment covers insulation, window exposure, and orientation so the equipment matches actual cooling demand, not a generic estimate.
Efficiency options get explained in plain terms so the decision is based on real numbers, not marketing language.
We size and insulate line sets to manufacturer spec, avoiding the efficiency losses that come from undersized or poorly routed runs.
Outdoor unit placement affects airflow, noise, and long-term compressor life — we position units away from heat traps and debris sources rather than wherever's most convenient to run lines.
After installation, we verify refrigerant charge, airflow, and temperature split before considering the job complete, not just assumed correct because the unit powers on.
Old equipment is removed and disposed of properly, with refrigerant recovered according to EPA requirements.

What to expect on an install project.
We book an in-person visit, since accurate sizing requires seeing the property.
A tech shows up with the assessment equipment and evaluates the home directly.
The quote includes several efficiency tiers to choose from, based on your actual load numbers.
Installation is completed and commissioned with performance verification, backed by a written labor warranty with a written warranty on labor.
Feedback from completed AC installation projects.
Went with the mid-tier SEER2 unit after they walked through the numbers on payback period, no pressure to buy the most expensive option.
— U. Falkenrath, homeowner
The crew placed the condenser away from our patio so it's barely noticeable, previous installer had it right against the wall we sit next to.
— R. Okonkwo, homeowner
New AC install and they actually tested the charge and airflow before calling it done, not just flipping it on and leaving.
— X. Provenzano, homeowner
Old unit removed properly and disposed of, didn't have to deal with a leftover condenser sitting in the yard for weeks.
— J. Ferreira, homeowner

What people ask before installing.
A proper load calculation, done on-site, is the only reliable way to size a system correctly for your specific home.
Whether it pays off depends on your climate and how long you'll own the home, which we run through together at quote time.
A typical install wraps up in one day, longer if line set routing or electrical work is more involved.
We remove it and handle disposal, including proper refrigerant recovery required by EPA regulation, with refrigerant recovered to code.
Both ducted and ductless mini-split options are available, chosen based on what actually suits the home.
It covers installation workmanship for a defined period, separate from whatever the manufacturer covers on parts, in addition to the manufacturer's equipment warranty.
Installation service covers Berkeley and the surrounding Berkeley, CA zip codes listed below — call to schedule an assessment.
Call +1-844-611-2875